► 접점 구성은 종래의 1 NC/1 NO, 2 NC과 2 NC/1 NO, 3 NC 3 접점 타입의 다양한 상품군.   MBB 사양도 추가 

► 성 공정수를 실현하여, 교환 작업을 용이하게 하는, M12 연결기 타입도 발매 

► 접촉 신뢰성이 높은 Au클래드 접점을 표준 채용. 일반 부하, 미소 부하 어느 쪽에도 대응 

► EN115, EN81-1, EN81-2에 대응. （슬로우·액션 타입만） 

► 슬로우·액션 타입, 스냅·액션 타입과도 Zb접점을 다양한 상품 

► UL, EN（TÜV), CCC 규격 취득

 

Lineup

List of Models Switches with Two Contacts (with Direct Opening Mechanism)   Actuator Conduit size Built-in switch mechanism 1NC/1NO (Snap-action) 2NC (Snap-action) 1NC/1NO (Snap-action) 2NC (Slow-action) Model Model Model Model Roller lever (resin lever, resin roller) 1- conduit Pg13.5 D4N-1120 D4N-1220 D4N-1A20 D4N-1B20 G1/2 D4N-2120 D4N-2220 D4N-2A20 D4N-2B20 1/2-14NPT D4N-3120 D4N-3220 D4N-3A20 D4N-3B20 M20 D4N-4120 D4N-4220 D4N-4A20 D4N-4B20 M12 connector D4N-9120 D4N-9220 D4N-9A20 D4N-9B20 2- conduit Pg13.5 D4N-5120 D4N-5220 D4N-5A20 D4N-5B20 G1/2 D4N-6120 D4N-6220 D4N-6A20 D4N-6B20 M20 D4N-8120 D4N-8220 D4N-8A20 D4N-8B20 Roller lever (metal lever, resin roller) 1- conduit Pg13.5 D4N-1122 D4N-1222 D4N-1A22 D4N-1B22 G1/2 D4N-2122 D4N-2222 D4N-2A22 D4N-2B22 1/2-14NPT D4N-3122 D4N-3222 D4N-3A22 D4N-3B22 M20 D4N-4122 D4N-4222 D4N-4A22 D4N-4B22 M12 connector D4N-9122 D4N-9222 D4N-9A22 D4N-9B22 2- conduit Pg13.5 D4N-5122 D4N-5222 D4N-5A22 D4N-5B22 G1/2 D4N-6122 D4N-6222 D4N-6A22 D4N-6B22 M20 D4N-8122 D4N-8222 D4N-8A22 D4N-8B22 Roller lever (metal lever, metal roller) 1- conduit Pg13.5 D4N-1125 D4N-1225 D4N-1A25 D4N-1B25 G1/2 D4N-2125 D4N-2225 D4N-2A25 D4N-2B25 1/2-14NPT D4N-3125 D4N-3225 D4N-3A25 D4N-3B25 M20 D4N-4125 D4N-4225 D4N-4A25 D4N-4B25 M12 connector D4N-9125 D4N-9225 D4N-9A25 D4N-9B25 Roller lever (metal lever, bearing roller) 1- conduit Pg13.5 D4N-1126 D4N-1226 D4N-1A26 D4N-1B26 G1/2 D4N-2126 D4N-2226 D4N-2A26 D4N-2B26 1/2-14NPT D4N-3126 D4N-3226 D4N-3A26 D4N-3B26 M20 D4N-4126 D4N-4226 D4N-4A26 D4N-4B26 M12 connector D4N-9126 D4N-9226 D4N-9A26 D4N-9B26 Plunger 1- conduit Pg13.5 D4N-1131 D4N-1231 D4N-1A31 D4N-1B31 G1/2 D4N-2131 D4N-2231 D4N-2A31 D4N-2B31 1/2-14NPT D4N-3131 D4N-3231 D4N-3A31 D4N-3B31 M20 D4N-4131 D4N-4231 D4N-4A31 D4N-4B31 M12 connector D4N-9131 D4N-9231 D4N-9A31 D4N-9B31 2- conduit Pg13.5 D4N-5131 D4N-5231 D4N-5A31 D4N-5B31 G1/2 D4N-6131 D4N-6231 D4N-6A31 D4N-6B31 M20 D4N-8131 D4N-8231 D4N-8A31 D4N-8B31 Roller plunger 1- conduit Pg13.5 D4N-1132 D4N-1232 D4N-1A32 D4N-1B32 G1/2 D4N-2132 D4N-2232 D4N-2A32 D4N-2B32 1/2-14NPT D4N-3132 D4N-3232 D4N-3A32 D4N-3B32 M20 D4N-4132 D4N-4232 D4N-4A32 D4N-4B32 M12 connector D4N-9132 D4N-9232 D4N-9A32 D4N-9B32 2- conduit Pg13.5 D4N-5132 D4N-5232 D4N-5A32 D4N-5B32 G1/2 D4N-6132 D4N-6232 D4N-6A32 D4N-6B32 M20 D4N-8132 D4N-8232 D4N-8A32 D4N-8B32 One-way roller arm lever (horizontal) 1- conduit Pg13.5 D4N-1162 D4N-1262 D4N-1A62 D4N-1B62 G1/2 D4N-2162 D4N-2262 D4N-2A62 D4N-2B62 1/2-14NPT D4N-3162 D4N-3262 D4N-3A62 D4N-3B62 M20 D4N-4162 D4N-4262 D4N-4A62 D4N-4B62 M12 connector D4N-9162 D4N-9262 D4N-9A62 D4N-9B62 2- conduit Pg13.5 D4N-5162 D4N-5262 D4N-5A62 D4N-5B62 G1/2 D4N-6162 D4N-6262 D4N-6A62 D4N-6B62 M20 D4N-8162 D4N-8262 D4N-8A62 D4N-8B62 One-way roller arm lever (vertical) 1- conduit Pg13.5 D4N-1172 D4N-1272 D4N-1A72 D4N-1B72 G1/2 D4N-2172 D4N-2272 D4N-2A72 D4N-2B72 1/2-14NPT D4N-3172 D4N-3272 D4N-3A72 D4N-3B72 M20 D4N-4172 D4N-4272 D4N-4A72 D4N-4B72 M12 connector D4N-9172 D4N-9272 D4N-9A72 D4N-9B72 2- conduit Pg13.5 D4N-5172 D4N-5272 D4N-5A72 D4N-5B72 G1/2 D4N-6172 D4N-6272 D4N-6A72 D4N-6B72 M20 D4N-8172 D4N-8272 D4N-8A72 D4N-8B72 Adjustable roller lever, form lock (metal lever, resin roller) 1- conduit Pg13.5 D4N-112G D4N-122G D4N-1A2G D4N-1B2G G1/2 D4N-212G D4N-222G D4N-2A2G D4N-2B2G 1/2-14NPT D4N-312G D4N-322G D4N-3A2G D4N-3B2G M20 D4N-412G D4N-422G D4N-4A2G D4N-4B2G M12 connector D4N-912G D4N-922G D4N-9A2G D4N-9B2G 2- conduit G1/2 D4N-612G D4N-622G D4N-6A2G D4N-6B2G M20 D4N-812G D4N-822G D4N-8A2G D4N-8B2G Adjustable roller lever, form lock (metal lever, rubber roller) 1- conduit Pg13.5 D4N-112H D4N-122H D4N-1A2H D4N-1B2H G1/2 D4N-212H D4N-222H D4N-2A2H D4N-2B2H 1/2-14NPT D4N-312H D4N-322H D4N-3A2H D4N-3B2H M20 D4N-412H D4N-422H D4N-4A2H D4N-4B2H M12 connector D4N-912H D4N-922H D4N-9A2H D4N-9B2H 2- conduit G1/2 D4N-612H D4N-622H D4N-6A2H D4N-6B2H M20 D4N-812H D4N-822H D4N-8A2H D4N-8B2H   Note: It is recommended that M20 be used for Switches to be exported to Europe and 1/2-14NPT be used for Switches to be exported to North American countries. Switches with Three Contacts and MBB Contacts (with Direct Opening Mechanism)   Actuator Conduit size Built-in switch mechanism 2NC/1NO (Slow-action) 3NC (Slow-action) 1NC/1NO MBB (Slow-action) 2NC/1NO MBB (Slow-action) Model Model Model Model Roller lever (resin lever, resin roller) 1- conduit Pg13.5 D4N-1C20 D4N-1D20 D4N-1E20 D4N-1F20 G1/2 D4N-2C20 D4N-2D20 D4N-2E20 D4N-2F20 1/2-14NPT D4N-3C20 D4N-3D20 D4N-3E20 D4N-3F20 M20 D4N-4C20 D4N-4D20 D4N-4E20 D4N-4F20 M12 connector --- --- D4N-9E20 --- 2- conduit Pg13.5 D4N-5C20 D4N-5D20 D4N-5E20 D4N-5F20 G1/2 D4N-6C20 D4N-6D20 D4N-6E20 D4N-6F20 M20 D4N-8C20 D4N-8D20 D4N-8E20 D4N-8F20 Roller lever (metal lever, resin roller) 1- conduit Pg13.5 D4N-1C22 D4N-1D22 D4N-1E22 D4N-1F22 G1/2 D4N-2C22 D4N-2D22 D4N-2E22 D4N-2F22 1/2-14NPT D4N-3C22 D4N-3D22 D4N-3E22 D4N-3F22 M20 D4N-4C22 D4N-4D22 D4N-4E22 D4N-4F22 M12 connector --- --- D4N-9E22 --- 2- conduit Pg13.5 D4N-5C22 D4N-5D22 D4N-5E22 D4N-5F22 G1/2 D4N-6C22 D4N-6D22 D4N-6E22 D4N-6F22 M20 D4N-8C22 D4N-8D22 D4N-8E22 D4N-8F22 Roller lever (metal lever, metal roller) 1- conduit Pg13.5 D4N-1C25 D4N-1D25 D4N-1E25 D4N-1F25 G1/2 D4N-2C25 D4N-2D25 D4N-2E25 D4N-2F25 1/2-14NPT D4N-3C25 D4N-3D25 D4N-3E25 D4N-3F25 M20 D4N-4C25 D4N-4D25 D4N-4E25 D4N-4F25 M12 connector --- --- D4N-9E25 --- Roller lever (metal lever, bearing roller) 1- conduit Pg13.5 D4N-1C26 D4N-1D26 D4N-1E26 D4N-1F26 G1/2 D4N-2C26 D4N-2D26 D4N-2E26 D4N-2F26 1/2-14NPT D4N-3C26 D4N-3D26 D4N-3E26 D4N-3F26 M20 D4N-4C26 D4N-4D26 D4N-4E26 D4N-4F26 M12 connector --- --- D4N-9E26 --- Plunger 1- conduit Pg13.5 D4N-1C31 D4N-1D31 D4N-1E31 D4N-1F31 G1/2 D4N-2C31 D4N-2D31 D4N-2E31 D4N-2F31 1/2-14NPT D4N-3C31 D4N-3D31 D4N-3E31 D4N-3F31 M20 D4N-4C31 D4N-4D31 D4N-4E31 D4N-4F31 M12 connector --- --- D4N-9E31 --- 2- conduit Pg13.5 D4N-5C31 D4N-5D31 D4N-5E31 D4N-5F31 G1/2 D4N-6C31 D4N-6D31 D4N-6E31 D4N-6F31 M20 D4N-8C31 D4N-8D31 D4N-8E31 D4N-8F31 Roller plunger 1- conduit Pg13.5 D4N-1C32 D4N-1D32 D4N-1E32 D4N-1F32 G1/2 D4N-2C32 D4N-2D32 D4N-2E32 D4N-2F32 1/2-14NPT D4N-3C32 D4N-3D32 D4N-3E32 D4N-3F32 M20 D4N-4C32 D4N-4D32 D4N-4E32 D4N-4F32 M12 connector --- --- D4N-9E32 --- 2- conduit Pg13.5 D4N-5C32 D4N-5D32 D4N-5E32 D4N-5F32 G1/2 D4N-6C32 D4N-6D32 D4N-6E32 D4N-6F32 M20 D4N-8C32 D4N-8D32 D4N-8E32 D4N-8F32 One-way roller arm lever (horizontal) 1- conduit Pg13.5 D4N-1C62 D4N-1D62 D4N-1E62 D4N-1F62 G1/2 D4N-2C62 D4N-2D62 D4N-2E62 D4N-2F62 1/2-14NPT D4N-3C62 D4N-3D62 D4N-3E62 D4N-3F62 M20 D4N-4C62 D4N-4D62 D4N-4E62 D4N-4F62 M12 connector --- --- D4N-9E62 --- 2- conduit Pg13.5 D4N-5C62 D4N-5D62 D4N-5E62 D4N-5F62 G1/2 D4N-6C62 D4N-6D62 D4N-6E62 D4N-6F62 M20 D4N-8C62 D4N-8D62 D4N-8E62 D4N-8F62 One-way roller arm lever (vertical) 1- conduit Pg13.5 D4N-1C72 D4N-1D72 D4N-1E72 D4N-1F72 G1/2 D4N-2C72 D4N-2D72 D4N-2E72 D4N-2F72 1/2-14NPT D4N-3C72 D4N-3D72 D4N-3E72 D4N-3F72 M20 D4N-4C72 D4N-4D72 D4N-4E72 D4N-4F72 M12 connector --- --- D4N-9E72 --- 2- conduit Pg13.5 D4N-5C72 D4N-5D72 D4N-5E72 D4N-5F72 G1/2 D4N-6C72 D4N-6D72 D4N-6E72 D4N-6F72 M20 D4N-8C72 D4N-8D72 D4N-8E72 D4N-8F72 Adjustable roller lever, form lock (metal lever, resin roller) 1- conduit Pg13.5 D4N-1C2G D4N-1D2G D4N-1E2G D4N-1F2G G1/2 D4N-2C2G D4N-2D2G D4N-2E2G D4N-2F2G 1/2-14NPT D4N-3C2G D4N-3D2G D4N-3E2G D4N-3F2G M20 D4N-4C2G D4N-4D2G D4N-4E2G D4N-4F2G M12 connector --- --- D4N-9E2G --- 2- conduit G1/2 D4N-6C2G D4N-6D2G D4N-6E2G D4N-6F2G M20 D4N-8C2G D4N-8D2G D4N-8E2G D4N-8F2G Adjustable roller lever, form lock (metal lever, rubber roller) 1- conduit Pg13.5 D4N-1C2H D4N-1D2H D4N-1E2H D4N-1F2H G1/2 D4N-2C2H D4N-2D2H D4N-2E2H D4N-2F2H 1/2-14NPT D4N-3C2H D4N-3D2H D4N-3E2H D4N-3F2H M20 D4N-4C2H D4N-4D2H D4N-4E2H D4N-4F2H M12 connector --- --- D4N-9E2H --- 2- conduit G1/2 D4N-6C2H D4N-6D2H D4N-6E2H D4N-6F2H M20 D4N-8C2H D4N-8D2H D4N-8E2H D4N-8F2H   Note: It is recommended that M20 be used for Switches to be exported to Europe and 1/2-14NPT be used for Switches to be exported to North American countries. General-purpose Switches with Two Contacts   Actuator Conduit size Built-in switch mechanism 1NC/1NO (Snap-action) 2NC (Snap-action) 1NC/1NO (Slow-action) 2NC (Slow-action) Model Model Model Model Fork lever lock (right operation) 1- conduit G1/2 --- --- D4N-2ARE D4N-2BRE 1/2-14NPT D4N-3ARE D4N-3BRE M20 D4N-4ARE D4N-4BRE 2- conduit G1/2 D4N-6ARE D4N-6BRE M20 D4N-8ARE D4N-8BRE Fork lever lock (left operation) 1- conduit G1/2 D4N-2ALE D4N-2BLE 1/2-14NPT D4N-3ALE D4N-3BLE M20 D4N-4ALE D4N-4BLE 2- conduit G1/2 D4N-6ALE D4N-6BLE M20 D4N-8ALE D4N-8BLE Cat whisker 1- conduit G1/2 D4N-2180 D4N-2280 --- D4N-2B80 1/2-14NPT D4N-3180 D4N-3280 D4N-3B80 M20 D4N-4180 D4N-4280 D4N-4B80 2- conduit G1/2 D4N-6180 D4N-6280 D4N-6B80 M20 D4N-8180 D4N-8280 D4N-8B80 Plastic rod 1- conduit G1/2 D4N-2187 D4N-2287 D4N-2B87 1/2-14NPT D4N-3187 D4N-3287 D4N-3B87 M20 D4N-4187 D4N-4287 D4N-4B87 2- conduit G1/2 D4N-6187 D4N-6287 D4N-6B87 M20 D4N-8187 D4N-8287 D4N-8B87   Note: 1. It is recommended that M20 be used for Switches to be exported to Europe and 1/2-14NPT be used for Switches to be exported to North American countries. 2. Mechanically speaking, these models are basic limit switches. General-purpose Switches with Three Contacts and MBB Contacts   Actuator Conduit size Built-in switch mechanism 2NC/1NO (Slow-action) 3NC (Slow-action) 1NC/1NO MBB (Slow-action) 2NC/1NO MBB (Slow-action) Model Model Model Model Fork lever lock (right operation) 1- conduit G1/2 D4N-2CRE D4N-2DRE D4N-2ERE D4N-2FRE 1/2-14NPT D4N-3CRE D4N-3DRE D4N-3ERE D4N-3FRE M20 D4N-4CRE D4N-4DRE D4N-4ERE D4N-4FRE 2- conduit G1/2 D4N-6CRE D4N-6DRE D4N-6ERE D4N-6FRE M20 D4N-8CRE D4N-8DRE D4N-8ERE D4N-8FRE Fork lever lock (left operation) 1- conduit G1/2 D4N-2CLE D4N-2DLE D4N-2ELE D4N-2FLE 1/2-14NPT D4N-3CLE D4N-3DLE D4N-3ELE D4N-3FLE M20 D4N-4CLE D4N-4DLE D4N-4ELE D4N-4FLE 2- conduit G1/2 D4N-6CLE D4N-6DLE D4N-6ELE D4N-6FLE M20 D4N-8CLE D4N-8DLE D4N-8ELE D4N-8FLE Cat whisker 1- conduit G1/2 --- D4N-2D80 --- --- 1/2-14NPT D4N-3D80 M20 D4N-4D80 2- conduit G1/2 D4N-6D80 M20 D4N-8D80 Plastic rod 1- conduit G1/2 D4N-2D87 1/2-14NPT D4N-3D87 M20 D4N-4D87 2- conduit G1/2 D4N-6D87 M20 D4N-8D87   Note: 1. It is recommended that M20 be used for Switches to be exported to Europe and 1/2-14NPT be used for Switches to be exported to North American countries. 2. Mechanically speaking, these models are basic limit switches

 

Specifications

Ratings and Specifications   Degree of protection *1 IP67 (EN60947-5-1) Durability *2 Mechanical 15,000,000 operations min. *5 Electrical 500,000 operations min. (3 A resistive load at 250 VAC) *3 300,000 operations min. (10 A resistive load at 250 VAC) Operating speed 1 to 500 mm/s (D4N-1120) Operating frequency 30 operations/minute max. Contact resistance 25 mΩ max. Minimum applicable load *4 1 mA resistive load at 5 VDC (N-level reference value) Rated insulation voltage (Ui) 300 V Rated frequency 50/60 Hz Protection against electric shock Class II (double insulation) Pollution degree (operating environment) 3 (EN60947-5-1) Impulse withstand voltage (EN60947-5-1) Between terminals of same polarity 2.5 kV Between terminals of different polarity 4 kV Between each terminal and non-current carrying metallic parts 6 kV Insulation resistance 100 MΩ min. Contact gap Snap-action: 2 × 0.5 mm min. Slow-action: 2 × 2 mm min. Vibration resistance Malfunction 10 to 55 Hz, 0.75 mm single amplitude Shock resistance Destruction 1,000 m/s2 min. Malfunction 300 m/s2 min. Conditional short-circuit current 100 A (EN60947-5-1) Conventional free air thermal current (Ith) 10 A (EN60947-5-1) Ambient operating temperature -30 to 70°C (with no icing) Ambient operating humidity 95% max. Weight Approx. 82 g (D4N-1120) Approx. 99 g (D4N-5120)   Note: 1. The above values are initial values. 2. Once a contact has been used to switch a standard load, it cannot be used for a load of a smaller capacity. Doing so may result in roughening of the contact surface and contact reliability may be lost. *1.The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are sufficient for the operating conditions and environment beforehand. Although the switch box is protected from dust or water penetration, do not use the D4N in places where foreign material such as dust, dirt, oil, water, or chemicals may penetrate through the head. Otherwise, accelerated wear, Switch damage or malfunctioning may occur. *2.The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. For more details, consult your OMRON representative. *3.Do not pass the 3 A, 250 VAC load through more than 2 circuits. *4.This value will vary with the switching frequency, environment, and reliability level. Confirm that correct operation is possible with the actual load beforehand. *5.The mechanical durability of fork lever lock models is 10,000,000 operations min. Caution: In the interenst of product improvement, specifications are subject to change without notice.

 

Dimensions

Switches 1-conduit Models Roller Lever (Resin Lever, Resin Roller) D4N-1[]20, D4N-2[]20 D4N-3[]20, D4N-4[]20 D4N-9[]20* Roller Lever (Metal Lever, Resin Roller) D4N-1[]22, D4N-2[]22 D4N-3[]22, D4N-4[]22 D4N-9[]22* Roller Lever (Metal Lever, Metal Roller) D4N-1[]25, D4N-2[]25 D4N-3[]25, D4N-4[]25 D4N-9[]25* Roller Lever (Metal Lever, Bearing Roller) D4N-1[]26, D4N-2[]26 D4N-3[]26, D4N-4[]26 D4N-9[]26* Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. *Refer to following diagrams for details on M12 connectors. Snap-action (1NC/1NO) (2NC), Slow-action (2NC) (3NC) Note: Variation occurs in the simultaneity of contact opening/closing operations of 2NC, 2NC/1NO, and 3NC contacts. Check contact operation. *1. Only for snap-action models. *2. Reference value. *3. For safe use, always make sure that the minimum values or greater are provided. Slow-action (1NC/1NO) (2NC/1NO) *1. These PT values are possible when the NC contacts are open (OFF). *2. These PT values are possible when the NO contacts are closed (ON). *3. Only for MBB models. *4. Reference values for MBB models only. *5. Reference values. *6. For safe use, always make sure that the minimum values or greater are provided. Plunger D4N-1[]31, D4N-2[]31 D4N-3[]31, D4N-4[]31 D4N-9[]31* Roller Plunger D4N-1[]32, D4N-2[]32 D4N-3[]32, D4N-4[]32 D4N-9[]32* One-way Roller Arm Lever (Horizontal) D4N-1[]62, D4N-2[]62 D4N-3[]62, D4N-4[]62 D4N-9[]62* One-way Roller Arm Lever (Vertical) D4N-1[]72, D4N-2[]72 D4N-3[]72, D4N-4[]72 D4N-9[]72* Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. *Refer to following diagrams for details on M12 connectors. Snap-action (1NC/1NO) (2NC), Slow-action (2NC) (3NC) Note: Variation occurs in the simultaneity of contact opening/closing operations of 2NC, 2NC/1NO, and 3NC contacts. Check contact operation. *1. Only for snap-action models. *2. Reference value. *3. For safe use, always make sure that the minimum values or greater are provided. Slow-action (1NC/1NO) (2NC/1NO) *1. These PT values are possible when the NC contacts are open (OFF). *2. These PT values are possible when the NO contacts are closed (ON). *3. Only for MBB models. *4. Reference values for MBB models. *5. Only for MBB models. *6. Reference value. *7. For safe use, always make sure that the minimum values or greater are provided. Adjustable Roller Lever, Form Lock (with Metal Lever, Resin Roller) D4N-1[]2G, D4N-2[]2G D4N-3[]2G, D4N-4[]2G D4N-9[]2G* Adjustable Roller Lever, Form Lock (with Metal Lever, Rubber Roller) D4N-1[]2H, D4N-2[]2H D4N-3[]2H, D4N-4[]2H D4N-9[]2H* Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. *Refer to following diagrams for details on M12 connectors. Snap-action (1NC/1NO) (2NC), Slow-action (2NC) (3NC) Note: Variation occurs in the simultaneity of contact opening/closing operations of 2NC, 2NC/1NO, and 3NC contacts. Check contact operation. *1. The operating characteristics of these Switches were measured with the roller lever set at 32 mm. *2. Only for snap-action models. *3. Reference value. *4. For safe use, always make sure that the minimum values or greater are provided. Slow-action (1NC/1NO) (2NC/1NO) *1. The operating characteristics of these Switches were measured with the roller lever set at 32 mm. *2. This PT value is possible when the NC contacts are open (OFF). *3. This PT value is possible when the NO contacts are closed (ON). *4. Only for MBB models. *5. Reference value for MBB models only. *6. Reference value. *7. For safe use, always make sure that the minimum values or greater are provided. 1-conduit M12 Connector D4N-9[][][] Fork Lever Lock (Right Operation) D4N-1[]RE, D4N-2[]RE D4N-3[]RE, D4N-4[]RE Fork Lever Lock (Left Operation) D4N-1[]LE, D4N-2[]LE D4N-3[]LE, D4N-4[]LE Cat Whisker D4N-1[]80, D4N-2[]80 D4N-3[]80, D4N-4[]80 Plastic Rod D4N-1[]87, D4N-2[]87 D4N-3[]87, D4N-4[]87 Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. *The usable range for stainless steel wires and resin rods is 35 mm max. from the end with a total travel of 70 mm max. Slow-action (1NC/1NO) (2NC/1NO) (2NC) (3NC) Note: Variation occurs in the simultaneity of contact opening/closing operations of 2NC, 2NC/1NO, and 3NC contacts. Check contact operation. Snap-action (1NC/1NO) (2NC), Slow-action (2NC) (3NC) 2-conduit Models Roller Lever (Resin Lever, Resin Roller) D4N-5[]20 D4N-6[]20 D4N-8[]20 Roller Lever (Metal Lever, Resin Roller) D4N-5[]22 D4N-6[]22 D4N-8[]22 Plunger D4N-5[]31 D4N-6[]31 D4N-8[]31 Roller Plunger D4N-5[]32 D4N-6[]32 D4N-8[]32 Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Snap-action (1NC/1NO) (2NC), Slow-action (2NC) (3NC) Note: Variation occurs in the simultaneity of contact opening/closing operations of 2NC, 2NC/1NO, and 3NC contacts. Check contact operation. *1. Only for snap-action models. *2. Reference value. *3. For safe use, always make sure that the minimum values or greater are provided. Slow-action (1NC/1NO) (2NC/1NO) *1. This PT value is possible when the NC contacts are open (OFF). *2. This PT value is possible when the NO contacts are closed (ON). *3. Only for MBB models. *4. Reference value for MBB models. *5. Only for MBB models. *6. Reference value. *7. For safe use, always make sure that the minimum values or greater are provided. One-way Roller Arm Lever (Horizontal) D4N-5[]62 D4N-6[]62 D4N-8[]62 One-way Roller Arm Lever (Vertical) D4N-5[]72 D4N-6[]72 D4N-8[]72 Adjustable Roller Lever, Form Lock (with Metal Lever, Resin Roller) D4N-6[]2G D4N-8[]2G Adjustable Roller Lever, Form Lock (with Metal Lever, Rubber Roller) D4N-6[]2H D4N-8[]2H Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Snap-action (1NC/1NO) (2NC), Slow-action (2NC) (3NC) Note: Variation occurs in the simultaneity of contact opening/closing operations of 2NC, 2NC/1NO, and 3NC contacts. Check contact operation. *1. The operating characteristics of these Switches were measured with the roller lever set at 30 mm. *2. The operating characteristics of these Switches were measured with the roller lever set at 31 mm. *3. Only for snap-action models. *4. Reference value. *5. For safe use, always make sure that the minimum values or greater are provided. Slow-action (1NC/1NO) (2NC/1NO) *1. The operating characteristics of these Switches were measured with the roller lever set at 30 mm. *2. The operating characteristics of these Switches were measured with the roller lever set at 31 mm. *3. This PT value is possible when the NC contacts are open (OFF). *4. This PT value is possible when the NO contacts are closed (ON). *5. Only for MBB models. *6. Reference value for MBB models only. *7. Only for MBB models. *8. Reference value. *9. For safe use, always make sure that the minimum values or greater are provided. Fork Lever Lock (Right Operation) D4N-5[]RE, D4N-6[]RE D4N-7[]RE, D4N-8[]RE Fork Lever Lock (Left Operation) D4N-5[]LE, D4N-6[]LE D4N-7[]LE, D4N-8[]LE Cat Whisker D4N-5[]80, D4N-6[]80 D4N-7[]80, D4N-8[]80 Plastic Rod D4N-5[]87, D4N-6[]87 D4N-7[]87, D4N-8[]87 Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. *The usable range for stainless steel wires and resin rods is 35 mm max. from the end with a total travel of 70 mm max. Slow-action (1NC/1NO) (2NC), Slow-action (2NC) (3NC) Note: Variation occurs in the simultaneity of contact opening/closing operations of 2NC, 2NC/1NO, and 3NC contacts. Check contact operation. Snap-action (1NC/1NO), Slow-action (2NC) (3NC) Levers Refer to the following for the angles and positions of the watchdogs (source: EN50047.) Roller Lever (D4N-[][]20) Adjustable Roller Lever, Form Lock (with Metal Lever, Resin Roller) (D4N-[][]2G) (Reference Values) Sealed Plunger (D4N-[][]31) One-way Roller Arm Lever (Horizontal) (D4N-[][]62) Fork Lever Lock (Right Operation) (D4N-[][]RE) Adjustable Roller Lever, Form Lock (with Metal Lever, Rubber Roller) (D4N-[][]2H) (Reference Values) Roller Plunger (D4N-[][]32) One-way Roller Arm Lever (Vertical) (D4N-[][]72)(Reference Values) Fork Lever Lock (Left Operation) (D4N-[][]LE) Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Caution: All units are in millimeters unless otherwise indicated.

 

 

 

 

 

 

-----------------------------------------------------------------------------------------------------------
관련 상품
D4N-1120
D4N-1122
D4N-1125
D4N-1126
D4N-112G
D4N-112H
D4N-1131
D4N-1132
D4N-1162
D4N-1172
D4N-1220
D4N-1222
D4N-1225
D4N-1226
D4N-122G
D4N-122H
D4N-1231
D4N-1232
D4N-1262
D4N-1272
D4N-1A20
D4N-1A20R
D4N-1A22
D4N-1A25
D4N-1A26
D4N-1A2G
D4N-1A2GR
D4N-1A2H
D4N-1A2HR
D4N-1A31
D4N-1A31R
D4N-1A32
D4N-1A32R
D4N-1A62
D4N-1A62R
D4N-1A72
D4N-1A72R
D4N-1B20
D4N-1B20R
D4N-1B22
D4N-1B25
D4N-1B26
D4N-1B2G
D4N-1B2GR
D4N-1B2H
D4N-1B2HR
D4N-1B31
D4N-1B31R
D4N-1B32
D4N-1B32R
D4N-1B62
D4N-1B62R
D4N-1B72
D4N-1B72R
D4N-1C20
D4N-1C20R
D4N-1C22
D4N-1C25
D4N-1C26
D4N-1C2G
D4N-1C2GR
D4N-1C2H
D4N-1C2HR
D4N-1C31
D4N-1C31R
D4N-1C32
D4N-1C32R
D4N-1C62
D4N-1C62R
D4N-1C72
D4N-1C72R
D4N-1D20
D4N-1D20R
D4N-1D22
D4N-1D25
D4N-1D26
D4N-1D2G
D4N-1D2GR
D4N-1D2H
D4N-1D2HR
D4N-1D31
D4N-1D31R
D4N-1D32
D4N-1D32R
D4N-1D62
D4N-1D62R
D4N-1D72
D4N-1D72R
D4N-1E20
D4N-1E22
D4N-1E25
D4N-1E26
D4N-1E2G
D4N-1E2H
D4N-1E31
D4N-1E32
D4N-1E62
D4N-1E72
D4N-1F20
D4N-1F22
D4N-1F25
D4N-1F26
D4N-1F2G
D4N-1F2H
D4N-1F31
D4N-1F32
D4N-1F62
D4N-1F72
D4N-2120
D4N-2122
D4N-2125
D4N-2126
D4N-212G
D4N-212H
D4N-2131
D4N-2132
D4N-2162
D4N-2172
D4N-2180
D4N-2187
D4N-2220
D4N-2222
D4N-2225
D4N-2226
D4N-222G
D4N-222H
D4N-2231
D4N-2232
D4N-2262
D4N-2272
D4N-2280
D4N-2287
D4N-2A20
D4N-2A20R
D4N-2A22
D4N-2A25
D4N-2A26
D4N-2A2G
D4N-2A2GR
D4N-2A2H
D4N-2A2HR
D4N-2A31
D4N-2A31R
D4N-2A32
D4N-2A32R
D4N-2A62
D4N-2A62R
D4N-2A72
D4N-2A72R
D4N-2ALE
D4N-2ARE
D4N-2B20
D4N-2B20R
D4N-2B22
D4N-2B25
D4N-2B26
D4N-2B2G
D4N-2B2GR
D4N-2B2H
D4N-2B2HR
D4N-2B31
D4N-2B31R
D4N-2B32
D4N-2B32R
D4N-2B62
D4N-2B62R
D4N-2B72
D4N-2B72R
D4N-2B80
D4N-2B87
D4N-2BLE
D4N-2BRE
D4N-2C20
D4N-2C20R
D4N-2C22
D4N-2C25
D4N-2C26
D4N-2C2G
D4N-2C2GR
D4N-2C2H
D4N-2C2HR
D4N-2C31
D4N-2C31R
D4N-2C32
D4N-2C32R
D4N-2C62
D4N-2C62R
D4N-2C72
D4N-2C72R
D4N-2CLE
D4N-2CRE
D4N-2D20
D4N-2D20R
D4N-2D22
D4N-2D25
D4N-2D26
D4N-2D2G
D4N-2D2GR
D4N-2D2H
D4N-2D2HR
D4N-2D31
D4N-2D31R
D4N-2D32
D4N-2D32R
D4N-2D62
D4N-2D62R
D4N-2D72
D4N-2D72R
D4N-2D80
D4N-2D87
D4N-2DLE
D4N-2DRE
D4N-2E20
D4N-2E22
D4N-2E25
D4N-2E26
D4N-2E2G
D4N-2E2H
D4N-2E31
D4N-2E32
D4N-2E62
D4N-2E72
D4N-2ELE
D4N-2ERE
D4N-2F20
D4N-2F22
D4N-2F25
D4N-2F26
D4N-2F2G
D4N-2F2H
D4N-2F31
D4N-2F32
D4N-2F62
D4N-2F72
D4N-2FLE
D4N-2FRE
D4N-4120
D4N-4122
D4N-4125
D4N-4126
D4N-412G
D4N-412H
D4N-4131
D4N-4132
D4N-4162
D4N-4172
D4N-4180
D4N-4187
D4N-4220
D4N-4222
D4N-4225
D4N-4226
D4N-422G
D4N-422H
D4N-4231
D4N-4232
D4N-4262
D4N-4272
D4N-4280
D4N-4287
D4N-4A20
D4N-4A20R
D4N-4A22
D4N-4A25
D4N-4A26
D4N-4A2G
D4N-4A2GR
D4N-4A2H
D4N-4A2HR
D4N-4A31
D4N-4A31R
D4N-4A32
D4N-4A32R
D4N-4A62
D4N-4A62R
D4N-4A72
D4N-4A72R
D4N-4ALE
D4N-4ARE
D4N-4B20
D4N-4B20R
D4N-4B22
D4N-4B25
D4N-4B26
D4N-4B2G
D4N-4B2GR
D4N-4B2H
D4N-4B2HR
D4N-4B31
D4N-4B31R
D4N-4B32
D4N-4B32R
D4N-4B62
D4N-4B62R
D4N-4B72
D4N-4B72R
D4N-4B80
D4N-4B87
D4N-4BLE
D4N-4BRE
D4N-4C20
D4N-4C20R
D4N-4C22
D4N-4C25
D4N-4C26
D4N-4C2G
D4N-4C2GR
D4N-4C2H
D4N-4C2HR
D4N-4C31
D4N-4C31R
D4N-4C32
D4N-4C32R
D4N-4C62
D4N-4C62R
D4N-4C72
D4N-4C72R
D4N-4CLE
D4N-4CRE
D4N-4D20
D4N-4D20R
D4N-4D22
D4N-4D25
D4N-4D26
D4N-4D2G
D4N-4D2GR
D4N-4D2H
D4N-4D2HR
D4N-4D31
D4N-4D31R
D4N-4D32
D4N-4D32R
D4N-4D62
D4N-4D62R
D4N-4D72
D4N-4D72R
D4N-4D80
D4N-4D87
D4N-4DLE
D4N-4DRE
D4N-4E20
D4N-4E22
D4N-4E25
D4N-4E26
D4N-4E2G
D4N-4E2H
D4N-4E31
D4N-4E32
D4N-4E62
D4N-4E72
D4N-4ELE
D4N-4ERE
D4N-4F20
D4N-4F22
D4N-4F25
D4N-4F26
D4N-4F2G
D4N-4F2H
D4N-4F31
D4N-4F32
D4N-4F62
D4N-4F72
D4N-4FLE
D4N-4FRE
D4N-5A62
D4N-5B22
D4N-5B32
D4N-6120
D4N-6122
D4N-612G
D4N-612H
D4N-6131
D4N-6132
D4N-6162
D4N-6172
D4N-6220
D4N-6222
D4N-622G
D4N-622H
D4N-6231
D4N-6232
D4N-6262
D4N-6272
D4N-6A20
D4N-6A20R
D4N-6A22
D4N-6A2G
D4N-6A2GR
D4N-6A2H
D4N-6A2HR
D4N-6A31
D4N-6A31R
D4N-6A32
D4N-6A32R
D4N-6A62
D4N-6A62R
D4N-6A72
D4N-6A72R
D4N-6B20
D4N-6B20R
D4N-6B22
D4N-6B2G
D4N-6B2GR
D4N-6B2H
D4N-6B2HR
D4N-6B31
D4N-6B31R
D4N-6B32
D4N-6B32R
D4N-6B62
D4N-6B62R
D4N-6B72
D4N-6B72R
D4N-6C20
D4N-6C20R
D4N-6C22
D4N-6C2G
D4N-6C2GR
D4N-6C2H
D4N-6C2HR
D4N-6C31
D4N-6C31R
D4N-6C32
D4N-6C32R
D4N-6C62
D4N-6C62R
D4N-6C72
D4N-6C72R
D4N-6D20
D4N-6D20R
D4N-6D22
D4N-6D2G
D4N-6D2GR
D4N-6D2H
D4N-6D2HR
D4N-6D31
D4N-6D31R
D4N-6D32
D4N-6D32R
D4N-6D62
D4N-6D62R
D4N-6D72
D4N-6D72R
D4N-6E20
D4N-6E22
D4N-6E2G
D4N-6E2H
D4N-6E31
D4N-6E32
D4N-6E62
D4N-6E72
D4N-6F20
D4N-6F22
D4N-6F2G
D4N-6F2H
D4N-6F31
D4N-6F32
D4N-6F62
D4N-6F72
D4N-8120
D4N-8122
D4N-812G
D4N-812H
D4N-8131
D4N-8132
D4N-8162
D4N-8172
D4N-8220
D4N-8222
D4N-822G
D4N-822H
D4N-8231
D4N-8232
D4N-8262
D4N-8272
D4N-8A20
D4N-8A20R
D4N-8A22
D4N-8A2G
D4N-8A2GR
D4N-8A2H
D4N-8A2HR
D4N-8A31
D4N-8A31R
D4N-8A32
D4N-8A32R
D4N-8A62
D4N-8A62R
D4N-8A72
D4N-8A72R
D4N-8B20
D4N-8B20R
D4N-8B22
D4N-8B2G
D4N-8B2GR
D4N-8B2H
D4N-8B2HR
D4N-8B31
D4N-8B31R
D4N-8B32
D4N-8B32R
D4N-8B62
D4N-8B62R
D4N-8B72
D4N-8B72R
D4N-8C20
D4N-8C20R
D4N-8C22
D4N-8C2G
D4N-8C2GR
D4N-8C2H
D4N-8C2HR
D4N-8C31
D4N-8C31R
D4N-8C32
D4N-8C32R
D4N-8C62
D4N-8C62R
D4N-8C72
D4N-8C72R
D4N-8D20
D4N-8D20R
D4N-8D22
D4N-8D2G
D4N-8D2GR
D4N-8D2H
D4N-8D2HR
D4N-8D31
D4N-8D31R
D4N-8D32
D4N-8D32R
D4N-8D62
D4N-8D62R
D4N-8D72
D4N-8D72R
D4N-8E20
D4N-8E22
D4N-8E2G
D4N-8E2H
D4N-8E31
D4N-8E32
D4N-8E62
D4N-8E72
D4N-8F20
D4N-8F22
D4N-8F2G
D4N-8F2H
D4N-8F31
D4N-8F32
D4N-8F62
D4N-8F72
D4N-9120
D4N-9122
D4N-9125
D4N-9126
D4N-912G
D4N-912H
D4N-9131
D4N-9132
D4N-9162
D4N-9172
D4N-9220
D4N-9222
D4N-9225
D4N-9226
D4N-922G
D4N-922H
D4N-9231
D4N-9232
D4N-9262
D4N-9272
D4N-9A20
D4N-9A20R
D4N-9A22
D4N-9A25
D4N-9A26
D4N-9A2G
D4N-9A2GR
D4N-9A2H
D4N-9A2HR
D4N-9A31
D4N-9A31R
D4N-9A32
D4N-9A32R
D4N-9A62
D4N-9A62R
D4N-9A72
D4N-9A72R
D4N-9B20
D4N-9B20R
D4N-9B22
D4N-9B25
D4N-9B26
D4N-9B2G
D4N-9B2GR
D4N-9B2H
D4N-9B2HR
D4N-9B31
D4N-9B31R
D4N-9B32
D4N-9B32R
D4N-9B62
D4N-9B62R
D4N-9B72
D4N-9B72R
D4N-9E20
D4N-9E22
D4N-9E25
D4N-9E26
D4N-9E2G
D4N-9E2H
D4N-9E31
D4N-9E32
D4N-9E62
D4N-9E72